Specification
Features
Right angle converter is a power tool which consists of two parts, right angle type and 90 degree right angle type, which are converted by rotating and pushing and pulling respectively. The working principle is to convert the right angle part and 90 degree right angle part to each other by driving the rotor mounted on the rotor shaft by the motor and making it rotate around the center line of the rotor. During the working process, a certain friction force will be generated on the rotor shaft because of the large tilt angle of the rotor shaft, and the friction force on the rotor shaft can be adjusted by changing the rotational speed of the motor.
Applications
Right angle converters are widely used in electric drilling equipment, from the early hand tools to the later electric tools. Right angle converters are also widely used in the machinery industry. By using its rotary shaft and 90 degree right angle type part, the right angle converter can effectively convert the right angle type part to 90 degree right angle type part, thus achieving a high precision tool conversion.
In the process of using the right angle converter, the operator should pay attention to the following points:
1. Before use, the various parts of the right angle converter should be carefully checked to see if they are normal.
2. In the process of use, the operator should avoid working continuously for a long time so as not to cause equipment failure
3. During the operation, attention should be paid to whether the rotation direction of the right angle converter is correct to avoid unnecessary accidents.
Package content
1 x pearl cotton protection
1 x special foam for shockproof
1 x Special carton or wooden box
